|Minimum Order Quantity||1 Piece|
|Max Sheet Width||200-400 mm|
|Cutting Type||Fully Automatic|
|Job Thickness||0.1-0.5 mm|
Entry Gate withRoll Forming Line with 8 station , 1 Gear Boxes & 5 H.P. electrical.Control Panel semi autoCutting UnitTechnical Specifications : (Plate body)Maximum sheet width that can be formed : 380 mmMaximum sheet thickness in CRCA Strips that can be formed : 0.5 mmVertical distance between shafts : 165 mmHorizontal distance between shafts : 165 mmNumber of forming stations : 8 nos.Vertical station : 2 nos.Total HP for Line : 7(ABB)Speed of the machine : 7mt/minuteSize of machine : 2300 x 1100 x 1100 mmMandrel UncoilerCoil weight : 250 KG MaxCoil width : 200 MMCoil bore : 450 MM min, 510 MM max dia.Mandrel movement : Manually adjustedBack Tension : Manually adjustedEntry GateEntry gate will be provided for movement of sheet to roll former.
Main BaseThe main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shaftsThe roll shafts dia. 40mm will be manufactured from quality steel and will be keyed to locate tooling.
DriveThe drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 2 HP motor
ToolingOne set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.
Cutting UnitHydro. press 10 tone
Reviewed by 33 Users
Most Relevant Reviews